Bulls Eye primer-sealers solve common paint problems such as stains,
knots, fire damage, and other difficult surfaces. Whether a problem
exists or not, using a primer-sealer on any surface gives you a better-looking,
longer-lasting paint job.
Ordinary undercoaters either promote adhesion or prevent excessive
absorption of a topcoat by porous surfaces. Bulls Eye primer-sealers
perform both functions and seal off stains and blemishes. They help
painters get quality results on any paint job.
Why Use A Primer-Sealer?
You get a better paint job if you start with an undercoat designed
to seal, prime and block out stains. Painting on porous surfaces without
a sealer will result in poor and uneven gloss finish, poor scrubbability
and the surface will get dirty faster. Painting on stained or knotty
surfaces without a stain-killing primer-sealer will not properly cover
blemishes.
Primer-sealers save you time and frustration and help you paint like
a pro.
The following primers differ in resin base and solvent system. Which
to use depends on what's being painted and which solvent system the
painter prefers.
B-I-N is the original primer-sealer based on a
solution of shellac in alcohol.
|
Bulls Eye 1-2-3 is a water-based acrylic interior-exterior
primer-sealer.
|
Cover-Stain is an oil-based interior-exterior primer-sealer.
|
ICI Dulux® Prep & Prime®
 |
Prep & Prime® Stain Jammer
Water-Based Primer Sealer (1010)
Our professional best water based acrylic stain killer primer
for use on all wood, masonry or previously painted surfaces.
- Excellent adhesion
- Excellent enamel hold-out
- Excellent sealing
- Blocks stains
- Sandable
- Low VOC and odor
|
 |
Prep & Prime® Hi Hide Wall
Water-Based Primer Sealer (1000)
Premium quality latex wall primer for use under latex or alkyd
paints on properly prepared new or previously painted drywall
and masonry surfaces.
- Excellent hide and uniformity
- Excellent sealing and enamel holdout
- Quick drying and recoat
- Low VOC and odor
|
 |
Prep & Prime® Wall and Woodwork
100% Acrylic Water-Based Primer Sealer (1020)
Water based acrylic stain killer primer for use on all wood,
masonry or previously painted surfaces. Dries quickly to proper
hardness for easy sanding. Provides excellent adhesion to a
variety of surfaces including drywall, wood, cured plaster
and masonry.
- Sandable
- Excellent sealing and enamel holdout
- Excellent adhesion
- Fast drying
- Low VOC and odor
|
 |
Prep & Prime® PVA Wall
Water-Based Primer (1030)
Good quality latex primer for use under latex or alkyd paints
on properly prepared new or previously painted drywall, concrete
block and brick.
- Excellent sealing and enamel holdout
- May be topcoated with latex or alkyd paint
- Fast drying
- Low VOC and odor
|
 |
Prep & Prime® Vapor Barrier
Water-Based Primer Sealer (1060)
A premium quality latex primer sealer and vapor barrier for
interior walls and ceilings. It reduces loss of interior moisture
through the walls to help maintain insulation efficiency and
guards against exterior paint adhesion failures caused by condensation.
- Blocks moisture transmission
- Excellent enamel hold-out
- Fast drying
- High hiding
- Low VOC and odor
|
 |
Prep & Prime® High Build Fill and Seal
Water-Based Wall Surfacer (1040)
Latex high build wall surfacer for use under latex or alkyd
paints on properly prepared new or previously painted drywall
and masonry surfaces.
- Turns rough walls into smooth paintable surfaces
- Quick drying and recoat
- Low VOC and odor
|
 |
Prep & Prime® Odorless Interior
Water-Based Primer Sealer (9116)
Premium quality low-odor (no VOC) interior wall primer specially
formulated to provide exceptional hiding and sealing properties.
- Excellent hide and uniformity
- Excellent sealing and enamel holdout
- Quick drying and recoat
- Contains no VOCs
(untinted) and virtually no odor
- See more about Environmentally-Friendly
paints
|
